Order Products : sales@su-jiao.com
Witcom PE 2009/271
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | Witcom Engineering Plastics B.V. |
| Trademark: | Witcom PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fELd61_Witcom-PE-2009-271.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Witcom PE 2009/271 is a polyethylene product,. It can be processed by injection molding and is available in Europe. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.24 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow (3.00 mm) | 0.60 - 1.0 | % | ISO 2577 |
| Water Absorption | ISO 62 | ||
| Saturated, 23°C | 0.020 | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 0.010 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | < 45.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 2.0 - 4.0 | % | ISO 527-2 |
| Flexural Modulus | 5500 | MPa | ISO 178 |
| Flexural Stress | 45.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 2.8 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength | 8.0 | kJ/m² | ISO 180/1U |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermal Conductivity 1 | 2.3 | W/m/K | ASTM E1530 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+2 - 1.0E+4 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.00 mm) | HB | ISO 1210 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.050 | % | |
| Processing (Melt) Temp | 180 - 240 | °C | |
| Mold Temperature | 20.0 - 60.0 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.00 - 1.00 | MPa |
| Injection instructions |
|---|
| Screw speed: 0.1 - 0.25 m/sInjection pressure: Keep to a minimumHold pressure: Keep to a minimum |
| Note Message | |
|---|---|
| 1 . | through plane |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 101 SI 2 | RTP Company | PP Homopolymer | RTP |
| Boltaron 4330 | Boltaron Performance Products | PMMA+PVC | Boltaron |
| Dynaprene® VE3070A | Nantex Industry Co., Ltd. | TPE | Dynaprene® |
| LNP™ COLORCOMP™ 420C compound | SABIC Innovative Plastics | PBT | LNP™ COLORCOMP™ |
| OTECH PVC PL1001-3 - Plenum Jacket | OTECH Corporation | PVC, Unspecified | OTECH PVC |
