Order Products : sales@su-jiao.com
DOW™ LDPE 555E
| Category: | LDPE , Low Density Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | DOW™ LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fE7yW3_DOW-LDPE-555E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DOW LDPE 555E is a low density polyethylene resin with a fractional melt index especially designed for shrink films and industrial and consumer blown films. This resin provides exceptional bubble stability, high levels of shrink, excellent balance of stiffness, toughness and tear resistance, and a very good clarity. Main Characteristics:
|
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.926 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.30 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 51 | µm | |
| Secant Modulus | ASTM D882 | ||
| 2% Secant, MD : 51 µm | 200 | MPa | |
| 2% Secant, TD : 51 µm | 250 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Break, 51 µm | 22.0 | MPa | |
| TD : Break, 51 µm | 21.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 51 µm | 500 | % | |
| TD : Break, 51 µm | 650 | % | |
| Dart Drop Impact (51 µm) | 150 | g | ASTM D1709A |
| Elmendorf Tear Strength 1 | ASTM D1922 | ||
| MD : 51 µm | 250 | g | |
| TD : 51 µm | 330 | g |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 102 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | Method B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEOFLON™ AP-210AS | Daikin Fluorochemicals (China) Co., Ltd. | PFA | NEOFLON™ |
| Aegis® H135MP | Honeywell | Nylon 6 | Aegis® |
| CERTENE鈩?LLGF-120B | Muehlstein | LLDPE | CERTENE™ |
| Grivory® GV-5H EF nat | EMS-GRIVORY | Nylon 66+Nylon 6I/X | Grivory® |
| Polimid A 25 GF V0F K | Poliblend S.p.a. | Nylon 66 | Polimid A |
