Order Products : sales@su-jiao.com

SILVER® SA-2111

Category:	SEBS , Styrene Ethylene Butylene Styrene Block Copolymer
Manufacturer:	Guangdong Silver Age Sci & Tech. Co., Ltd
Trademark:	SILVER®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	fDygbX_SILVER-SA-2111.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
SlLVER® SA—2000 elastomer is a kind of fully hydrogenated styryl block copolymers, which is of preventing violet and ozone, and is applied for toys and insole by injection molding and extrusion. SA—2000 Elastomer (full-hydrogenated styryl block copolymers) Characteristics: preventing violet and ozone Applications: soft toys, seal ring, frog shoe, frog glasses, mask, strap, antenna coat, bearing, insole, pipe and so on

Message

SlLVER® SA—2000 elastomer is a kind of fully hydrogenated styryl block copolymers, which is of preventing violet and ozone, and is applied for toys and insole by injection molding and extrusion.

SA—2000 Elastomer (full-hydrogenated styryl block copolymers)

Characteristics:

preventing violet and ozone

Applications:

soft toys, seal ring, frog shoe, frog glasses, mask, strap, antenna coat, bearing, insole, pipe and so on

General Information
Uses	Bearings Footwear Piping Seals Strapping Toys
Appearance	Clear/Transparent
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.858	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (130°C/2.16 kg)	1.4	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 3 sec)	8		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹	0.500	MPa	ASTM D638
Tensile Elongation ²(Break)	> 650	%	ASTM D638

Injection	Nominal Value	Unit
Processing (Melt) Temp	170 to 200	°C

Extrusion	Nominal Value	Unit
Melt Temperature	170 to 200	°C

Note Message
1 .	500 mm/min
2 .	500 mm/min

Resin Grade	Manufacturer	Category	Trademark
SABIC® LDPE PCG00	Saudi Basic Industries Corporation (SABIC)	LDPE	SABIC® LDPE
AKROMID® B3 GF 50 1 black (2488)	AKRO-PLASTIC GmbH	Nylon 6	AKROMID®
Axiall PVC 19880	Axiall Corporation	PVC, Flexible	Axiall PVC
Kemcor MDX 598	Qenos Pty Ltd	MDPE	Kemcor
TOTAL Polyethylene Lumicene® M 3410 EP (EU - Blow Molding)	TOTAL Refining & Chemicals	mMDPE	TOTAL Polyethylene