| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Westlake LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fDlgxy_Westlake-LDPE-EM1550AA.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
WESTLAKE low-density polyethylene EM1550 is a low-density formulation used for injection molding applications. EM1550AA = 1550A |
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.917 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.5 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 11.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 500 | % | ASTM D638 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 149 to 166 | °C |
| Note Message | |
|---|---|
| 1 . | Type IV, 500 mm/min |
| 2 . | Type IV, 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsamid® AECV Noir P40 T8L | Arkema | Nylon 12 | Rilsamid® |
| Adsyl 5 C 39 F | LyondellBasell Industries | Polyolefin, Unspecified | Adsyl |
| Grivory® GVL-4H nat | EMS-GRIVORY | Nylon 66+Nylon 6I/X | Grivory® |
| Epoxies, Ect. 50-3186 NC | Epoxies, Etc. | Epoxy | Epoxies, Ect. |
| NORYL™ NH7111E resin | SABIC Innovative Plastics | PPE+PS | NORYL™ |