Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Molding M3880
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Molding |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fCUD5r_GeonVinylRigidMoldingM3880.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Geon™Vinyl Rigid Molding M3880 is a rigid PVC product,. It is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. Geon™The application fields of Vinyl Rigid Molding M3880 include electrical appliances and water pipes/pipes/drinking water. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.33 | g/cm³ | ASTM D792 |
| Spiral Flow | 102 | cm | |
| Molding Shrinkage - Flow | 0.20 - 0.50 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 79 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2590 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 41.4 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 35 | % | ASTM D638 |
| Flexural Modulus | 2410 | MPa | ASTM D790 |
| Flexural Strength | 67.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| -18°C, 3.18mm, injection molding | 160 | J/m | ASTM D256A |
| 0°C, 3.18mm, injection molding | 210 | J/m | ASTM D256A |
| 23°C, 3.18mm, injection molding | 800 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, 3.18mm | 72.2 | °C | ASTM D648 |
| 0.45 MPa, annealed, 3.18mm | 70.0 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 6.35mm | 68.9 | °C | ASTM D648 |
| 1.8 MPa, annealed, 6.35mm | 72.8 | °C | ASTM D648 |
| RTI Elec | 90.0 | °C | UL 746 |
| RTI Imp | 85.0 | °C | UL 746 |
| RTI | 90.0 | °C | UL 746 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.4 mm, ALL | V-0 | UL 94 | |
| 1.6 mm, ALL | 5VA | UL 94 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| CSA Flammability 4(1.60 mm) | V-0 5VA |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 199 - 210 | °C |
| Note Message | |
|---|---|
| 1 . | Type 1, 51mm/min |
| 2 . | Type 1, 51mm/min |
| 3 . | Type 1, 51mm/min |
| 4 . | All Colors |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYshine PBT D221 GF30 | Polykemi AB | PBT | POLYshine |
| Andur 90 AP | Anderson Development Company | PUR-Ether/TDI | Andur |
| EcoBlend® KCA9451NH | Shanghai KumhoSunny Plastics Co., Ltd. | PC+PET | EcoBlend® |
| HiFill® PA6/6 GF35 HS L | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| LNP™ THERMOCOMP™ RF002ES compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
