Order Products : sales@su-jiao.com
Westlake LDPE EF310
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Westlake LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fAcluz_WestlakeLDPEEF310.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
WESTLAKE polyethylene EF310 is a low-density polyethylene suggested for cast film bakery applications. This material has outstanding optical and processing properties. Application/Uses
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.2 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| secant modulus | ASTM D882 | ||
| 1% secant, MD : 32 µm, blown film | 186 | MPa | ASTM D882 |
| 1% secant, TD : 32 µm, blown film | 228 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Broken, 32 µm, blown film | 23.4 | MPa | ASTM D882 |
| TD : Broken, 32 µm, blown film | 22.1 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Broken, 32 µm, blown film | 580 | % | ASTM D882 |
| TD : Broken, 32 µm, blown film | 750 | % | ASTM D882 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 31.8 µm, Blown Film) | 80 | ASTM D2457 | |
| Haze (31.8 µm, Blown Film) | 3.8 | % | ASTM D1003 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dart Impact 1(31.8 µm) | 38.6 | kN/m | ASTM D1709 |
| Test specimens for blown film: nominal thickness 1.25 mils; blow up ratio 2.5:1, die gap 35 mils. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 182 - 199 | °C |
| Note Message | |
|---|---|
| 1 . | Blown Film |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 6 FRM 2 | Plastcom | Nylon 6 | SLOVAMID® 6 |
| Xuchuan XCW-8572H | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| CALP 1450G | Lion Idemitsu Composites Co., Ltd. | Polyolefin, Unspecified | CALP |
| Clyrell RC1908 | LyondellBasell Industries | PP Copolymer | Clyrell |
| POTICON VT26 | Otsuka Chemical Co., Ltd. | LCP | POTICON |
