Category: | LDPE , Low Density Polyethylene |
Manufacturer: | REPSOL |
Trademark: | ALCUDIA® LDPE |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | f8nVnF_ALCUDIALDPEPE004.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
ALCUDIA® PE-004 is a natural and crosslinkable low density polyethylene specifically designed to be cross-linked by organic peroxide. The outstanding features of this grade are cleanliness, excellent processability, high efficiency of crosslinking, good mechanical properties and smooth surface finish. This grade does not contain antioxidant, therefore, it is necessary to add in proper balance of a non-staining antioxidant and peroxide to ensure thermal stability and optimum cure level. ALCUDIA® PE-004 is normally supplied in octabins, tankers and van-boxes. TYPICAL APPLICATIONS Medium voltage cable insulation. Processing conditions of ALCUDIA® PE-004 are dependent on formulation and technique employed but it is noteworthy that this grade is suitable to use in a temperature range of 120°C - 130°C. ALCUDIA® PE-004 meets the following standards: ISO 1872 PE KHN 18D022; ASTM D 1248 I, A3 Grade E5. |
General Information | |
---|---|
Features |
|
Uses |
|
Agency Ratings |
|
Appearance |
|
Forms |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density (23°C) | 0.920 | g/cm³ | ISO 1183 |
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.4 | g/10 min | ISO 1133 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Stress (Break) | 14.0 | MPa | ISO 527-2 |
Tensile Strain (Break) | 500 | % | ISO 527-2 |
Aging | Nominal Value | Unit | Test Method |
---|---|---|---|
Retention of Mechanical Properties 1(100°C) | > 75 | % | ISO 527-2 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Thermoset 2(200°C) | % | IEC 60811-2-1 | |
Vicat Softening Temperature | 91.0 | °C | ISO 306/A |
Electrical | Nominal Value | Unit | Test Method |
---|---|---|---|
Volume Resistivity | > 1.0E+16 | ohms·cm | ASTM D257 |
Dielectric Strength 3 | > 22 | kV/mm | IEC 60243-1 |
Dielectric Constant (1 MHz) | 2.30 | ASTM D150 | |
Dissipation Factor (1 MHz) | 3.0E-4 | ASTM D150 |
Extrusion | Nominal Value | Unit | |
---|---|---|---|
Melt Temperature | 120 - 130 | °C |
Note Message | |
---|---|
1 . | 10 days, 1.9% Peroxide + 0.2% AO |
2 . | 20 N/cm², 1.9% Peroxide + 0.2% AO |
3 . | 50 Hz |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
RTP 2587 FR | RTP Company | PC+ABS | RTP |
NOVADURAN® 5010GN1-15AM | Mitsubishi Engineering-Plastics Corp | PBT | NOVADURAN® |
Hylon® N1015STHL | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
Infino XP-2130A | SAMSUNG SDI CO., LTD. | PPS | Infino |
Kepital® MX25BT01 | KEP Americas | Acetal (POM) Copolymer | Kepital® |