Order Products : sales@su-jiao.com

Reon 67GER01

Category:	PVC Homopolymer , Polyvinyl Chloride Homopolymer
Manufacturer:	Reliance Industries Limited
Trademark:	Reon
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	f8Zwz9_Reon-67GER01.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
67GER01 is a medium molecular weight suspension type PVC resin suitable for rigid extrusion products. It is specially recommended for rigid pipes & conduits, rigid profiles, rigid sheets, unplasticised tubular film, etc. Its combination of medium molecular weight with high apparent bulk density makes it suitable for easy processing at high output rate, still maintaining the high mechanical properties. Its balanced heat loss property does not allow static to develop and reduces the flow time. At the same time the resin contains minimum volatiles. The narrow range of porosity of 67GER01 makes it easy to maintain a uniform fusion point at constant lubricant level. Uniform coarseness of the grains of this resin results in easy bulk handling, minimum requirement of lubricant and more uniform fluxing in the extruder.

Message

67GER01 is a medium molecular weight suspension type PVC resin suitable for rigid extrusion products. It is specially recommended for rigid pipes & conduits, rigid profiles, rigid sheets, unplasticised tubular film, etc. Its combination of medium molecular weight with high apparent bulk density makes it suitable for easy processing at high output rate, still maintaining the high mechanical properties. Its balanced heat loss property does not allow static to develop and reduces the flow time. At the same time the resin contains minimum volatiles. The narrow range of porosity of 67GER01 makes it easy to maintain a uniform fusion point at constant lubricant level. Uniform coarseness of the grains of this resin results in easy bulk handling, minimum requirement of lubricant and more uniform fluxing in the extruder.

General Information
Features	Good Processability High Flow Homopolymer Medium Molecular Weight
Uses	Film Piping Profiles Sheet
Agency Ratings	IS 10151
Processing Method	Blown Film Calendering Extrusion

Physical	Nominal Value	Unit	Test Method
Apparent Density	0.55	g/cm³	ASTM D1895
K-Value ¹	67.0
Inherent Viscosity	0.92		ASTM D1243
Particle Size Distribution			ASTM D1921
Retention on ASTM 40 mesh	< 0.10	%
Retention on ASTM 60 mesh	< 5.0	%
Through ASTM 140 mesh	< 25	%

Thermal	Nominal Value	Unit	Test Method
Heat Loss	< 0.30	%	ASTM D3030

Additional Information	Nominal Value	Unit	Test Method
Dark Resin - for 100 g resin	< 10.0	count/g
Flow Time	< 25.0	sec	ASTM D1895
Porosity - DOP	0.210 to 0.290	cm³/g	ASTM D3367
Residual Vinyl Chloride Monomer	< 2	ppm	ASTM D3749

Note Message
1 .	@ 1% in cyclohexanone

Resin Grade	Manufacturer	Category	Trademark
RTP 209 HS	RTP Company	Nylon 66	RTP
Retpol® PDR 1619/4 HS	PolyPacific Pty. Ltd.	PP Homopolymer	Retpol®
TES J-4/30/V0 RD6922	Techmer Engineered Solutions	Nylon 612	TES
Keysor PVC KYHH	Keysor-Century Corporation	PVC, Unspecified	Keysor PVC
Iupilon® EFD2110U	Mitsubishi Engineering-Plastics Corp	PC	Iupilon®