Order Products : sales@su-jiao.com
LG SAN 82TR
| Category: | SAN , Styrene Acrylonitrile |
| Manufacturer: | LG Chem Ltd. |
| Trademark: | LG SAN |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | f7Tnfo_LG-SAN-82TR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LG SAN 82TR Application: Products demanding high transparency such as refrigerator sleeves. Features: SAN from LG chemical has excellent heat resistance,chemical resistance ,mechanical properties, processibility and transparency. SAN resin is widely used for production of eletric/eletronic components,automobile components and household articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Multi-Point Data |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.07 | g/cm³ | ASTM D792 |
| -- | 1070 | kg/m³ | ISO 1183 1 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 200°C/5.0 kg | 5.0 | g/10 min | |
| 220°C/10.0 kg | 53 | g/10 min | |
| 230°C/3.8 kg | 18 | g/10 min | |
| Melt volume-flow rate (220°C/10.0 kg) | 59.9 | cm³/10min | ISO 1133 2 |
| Molding Shrinkage - Flow | 0.40 to 0.70 | % | ASTM D955 |
| Water Absorption (Saturation) | 0.14 | % | ISO 62 3 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 124 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- 4 | 3080 | MPa | ASTM D638 |
| -- | 3100 | MPa | ISO 527-2 5 |
| Tensile Strength | |||
| Yield 6 | 66.7 | MPa | ASTM D638 |
| Break | 64.0 | MPa | ISO 527-2 7 |
| Tensile Elongation | |||
| Break 8 | 6.0 | % | ASTM D638 |
| Break | 5.0 | % | ISO 527-2 9 |
| Flexural Modulus 10 | 3600 | MPa | ASTM D790 |
| Flexural Strength 11(Yield) | 108 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy notched impact strength | ISO 179/1eA 12 | ||
| -30°C | 2.00 | kJ/m² | |
| 23°C | 3.00 | kJ/m² | |
| Charpy impact strength | ISO 179/1eU 13 | ||
| -30°C | 5.00 | kJ/m² | |
| 23°C | 13.0 | kJ/m² | |
| Notched Izod Impact | ASTM D256 | ||
| -30°C, 6.35 mm | 9.8 | J/m | |
| 23°C, 6.35 mm | 9.8 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 6.35 mm) | 90.0 | °C | ASTM D648 |
| Glass Transition Temperature 14 | 110 | °C | ISO 11357-2 15 |
| Vicat Softening Temperature | |||
| -- | 101 | °C | ASTM D1525 16 |
| 50°C/h, B (50N) | 98.4 | °C | ISO 306 17 |
| CLTE | ISO 11359-2 18 | ||
| Flow | 6.7E-5 | cm/cm/°C | |
| Transverse | 6.7E-5 | cm/cm/°C | |
| RTI Elec | 50.0 | °C | UL 746 |
| RTI Imp | 50.0 | °C | UL 746 |
| RTI Str | 50.0 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface resistivity | > 1.0E+15 | ohms | IEC 60093 19 |
| Volume resistivity | > 1.0E+13 | ohms·m | IEC 60093 20 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.59 mm | HB | ||
| 3.18 mm | HB | ||
| Burning Behav. at thickness h (3.20 mm, UL) | HB | ISO 1210 21 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 90.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Processing (Melt) Temp | 190 to 230 | °C | |
| Mold Temperature | 40.0 to 80.0 | °C |
| Note Message | |
|---|---|
| 1 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 2 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 3 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 4 . | 1.0 mm/min |
| 5 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 6 . | 50 mm/min |
| 7 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 8 . | 50 mm/min |
| 9 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 10 . | 15 mm/min |
| 11 . | 15 mm/min |
| 12 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 13 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 14 . | 10 °C/min |
| 15 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 16 . | Rate A (50°C/h), Loading 2 (50 N) |
| 17 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 18 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 19 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 20 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 21 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 66 FRC 3 TS | Plastcom | Nylon 66 | SLOVAMID® 66 |
| Wondel® C CSR0P | Nanjing Julong Engineering Plastics Co., LTD | PC+ABS | Wondel® C |
| 4PROP® 9D12410 H | 4Plas | PP Homopolymer | 4PROP® |
| Devcon HV Tile Adhesive | Devcon | Epoxy | Devcon |
| EnCom F0 ABS 6040 | EnCom, Inc. | ABS | EnCom |
