Order Products : sales@su-jiao.com

Miramid® FP10KSC

Category:	Nylon 6 , Polyamide 6
Manufacturer:	BASF Leuna GmbH
Trademark:	Miramid®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	f6nIBg_Miramid-FP10KSC.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Miramid® FP10KSC is a Polyamide 6 (Nylon 6) material. It is available in Europe for injection molding.

Important attributes of Miramid® FP10KSC are:

Chemical Resistant

Crystalline

Fast Molding Cycle

Impact Resistant

Mold Release Agent

Typical applications include:

Engineering/Industrial Parts

Automotive

Construction Applications

Electrical/Electronic Applications

Furniture

General Information
Additive	Mold Release
Features	Crystalline Fast Molding Cycle Fuel Resistant Good Flow Good Impact Resistance Grease Resistant Oil Resistant Solvent Resistant
Uses	Automotive Applications Building Materials Electrical Parts Fasteners Fittings Furniture Housings Plugs
Forms	Granules
Processing Method	Injection Molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1)

Physical	Dry	Conditioned	Unit	Test Method
Density	1120	--	kg/m³	ISO 1183 ¹
Water Absorption				ISO 62 ²
Saturation	8.5	--	%
Equilibrium	2.8	--	%

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile modulus	2700	1000	MPa	ISO 527-2 ³
Tensile Stress (Yield)	70.0	40.0	MPa	ISO 527-2 ⁴
Tensile Strain (Yield)	4.0	20	%	ISO 527-2 ⁵
Nominal Tensile Strain at Break	10	> 50	%	ISO 527-2

Impact	Dry	Conditioned	Unit	Test Method
Charpy notched impact strength				ISO 179/1eA ⁶
-30°C	6.00	--	kJ/m²
23°C	8.00	30.0	kJ/m²
Charpy impact strength				ISO 179/1eU ⁷
-30°C	No Break	--
23°C	No Break	No Break

Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load				ISO 75-2 ⁸
0.45 MPa	180	--	°C
1.8 MPa	60.0	--	°C
Melting Temperature (DSC)	220	--	°C	ISO 3146

Electrical	Dry	Conditioned	Unit	Test Method
Volume resistivity	1.0E+13	1.0E+10	ohms·m	IEC 60093 ⁹
Dielectric Constant (1 MHz)	3.40	6.00		IEC 60250
Dissipation Factor (1 MHz)	0.015	0.25		IEC 60250 ¹⁰
Comparative tracking index	600	--		IEC 60112 ¹¹

Injection	Dry	Unit
Processing (Melt) Temp	240 to 260	°C
Mold Temperature	40.0 to 80.0	°C

Note Message
1 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
2 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
3 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
4 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
5 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
6 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
7 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
8 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
9 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
10 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
11 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.

Resin Grade	Manufacturer	Category	Trademark
Medalist™ MD-12150 XRD (PRELIMINARY DATA)	Teknor Apex Company	TPE	Medalist™
Starflam AFR682A1	Eurostar Engineering Plastics	Nylon 66	Starflam
Adell Polyamide BJ-13 Impact Modified	Adell Plastics, Inc.	Nylon 6	Adell Polyamide
ADMER™ NE072E	Mitsui Chemicals Europe GmbH	PE, Unspecified	ADMER™
CALIBRE™ 701-15	Trinseo	PC	CALIBRE™