Order Products : sales@su-jiao.com
NEOPLAST 187 FT EB
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Zylog Plastalloys |
| Trademark: | NEOPLAST |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | f1rgiR_NEOPLAST-187-FT-EB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Neoplast 187 FT EB is a hard, dynamically vulcanized thermoplastic vulcanizate (TPV), based on polyolefin chemistry, and is intended for Injection Moulding, Blow Moulding and Extrusion applications. Key Features: Excellent Ozone resistance, Good Flex fatigue, RoHS Compliant, UV Stabilised |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.960 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec, 23°C) | 92 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 10.8 | MPa | ASTM D412 |
| Tensile Strength 2(Break) | 16.7 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 600 | % | ASTM D412 |
| Tear Strength 4 | 49.0 | kN/m | ASTM D624 |
| Compression Set (70°C, 22 hr) | 48 | % | ASTM D395B |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (150°C, 168 hr) | 10 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (150°C, 168 hr) | -12 | % | ASTM D573 |
| Change in Durometer Hardness in Air (150°C, 168 hr) | 1.0 | ASTM D573 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | 135 | °C | SAE J2236 |
| Brittleness Temperature | -55.0 | °C | ASTM D746 |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| 3 . | 500 mm/min |
| 4 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Reslen PPH 10/GWT 960 HF | Polimarky Spolka Jawna | PP Homopolymer | Reslen |
| AKROMID® A4 5 EN natural (3162) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| Andur 1-8 APLM/Curene® 442 | Anderson Development Company | PUR-Ester/TDI | Andur |
| HOPELEX PC-1220R | Lotte Chemical Corporation | PC | HOPELEX |
| WELLAMID Nylon 6000 GV 30 HWUVCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 6 | WELLAMID Nylon |
