Order Products : sales@su-jiao.com
KMI PP KM-057IB
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | KMI Group, Inc. |
| Trademark: | KMI PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eyfX4U_KMIPPKM057IB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
KM-057IB is a high flow impact copolymer for injection molding applications. It exhibits a high rigidity as well as excellent impact strength due to the ideal combination of highly crystalline homo matrix and the well-designed rubber morphology. This is suitable for the injection molding of large articles which require high melt flowability. Food Contact Application: KM-057IB meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. Characteristics:
|
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 28 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 90 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 29.4 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 100 | % | ASTM D638 |
| Flexural Modulus | 1670 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (23°C) | 78 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Distortion | 120 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DURACON® NW-02LV | Polyplastics Co., Ltd. | Acetal (POM) Copolymer+PE | DURACON® |
| Heraflex® HA 60-22-60 | Radici Plastics | SEBS | Heraflex® |
| Huafon JF-W-H3060P | Huafon Group Co., Ltd. | PUR, Unspecified | Huafon |
| Plenco 08112 (Compression) | Plastics Engineering Co. | Polyester, TS | Plenco |
| PLUSTEK PA4501G6 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
