Order Products : sales@su-jiao.com
Viton® B-202
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | DuPont Performance Elastomers |
| Trademark: | Viton® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eydeC0_Viton-B-202.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Viton® B-202* is a low viscosity, B-type gum polymer that demonstrates improved processing and rheology when compared with existing fluoroelastomers. Viton B-202 is designed to be cured with either Viton Curative #30 or Viton Curative #50. When using Viton Curative #30, use Viton Curative #20 in a ratio of about 1.8 Viton Curative #30 to Viton Curative #20. When using Viton Curative #50, use 0.3-0.5 phr of Viton Curative #20 to ensure a fast cure rate. Note that Viton Curative #20 can be difficult to mix into low viscosity stocks, such as those based on Viton B-202, and careful attention needs to be paid to mixing procedures. Compared with other B-family terpolymers, Viton B-202 provides: -Low viscosity -Improved processing -Increased mold flow -Excellent mold release Applications -Transfer and injection molding of complex shapes -Extrusions (e.g., fuel hose and tubing) -Solution coatings of fabrics, tanks or chemical containers Viton B-202 can be blended with other Viton types to modify viscosity, enhance processibility and/or improve flow. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.86 | g/cm³ | ASTM D792 |
| Mooney Viscosity | 20 | MU | ASTM D1646 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 77 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 3.70 | MPa | ASTM D412 |
| Tensile Strength (Break) | 8.70 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 310 | % | ASTM D412 |
| Compression Set | |||
| 150°C, 70 hr | 20 | % | ASTM D395B |
| 200°C, 70 hr | 34 | % | ASTM D395 |
| 200°C, 168 hr | 42 | % | ASTM D395B |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air | ASTM D573 | ||
| 200°C, 168 hr | 55 | % | ASTM D573 |
| 100% strain, 200°C, 168 hr | 57 | % | ASTM D573 |
| 232°C, 24 hr | 52 | % | ASTM D573 |
| 100% strain, 232°C, 24 hr | 38 | % | ASTM D573 |
| 250°C, 168 hr | 29 | % | ASTM D573 |
| 100% strain, 250°C, 168 hr | 24 | % | ASTM D573 |
| Change in Ultimate Elongation in Air | ASTM D573 | ||
| 200°C, 168 hr | -26 | % | ASTM D573 |
| 232°C, 24 hr | -23 | % | ASTM D573 |
| 250°C, 168 hr | -26 | % | ASTM D573 |
| Change in Durometer Hardness in Air | ASTM D573 | ||
| Support a, 200°C, 168 hr | 3.0 | ASTM D573 | |
| Support a, 232°C, 4 hr | 1.0 | ASTM D573 | |
| Support a, 250°C, 168 hr | -26 2.0 | ASTM D573 | |
| Change in Tensile Strength | ASTM D471 | ||
| 150°C, 168 hr, in ASTM 105 oil | -23 | % | ASTM D471 |
| 100% strain, 150°C, 168 hr, in ASTM 105 oil | 49 | % | ASTM D471 |
| 200°C, 70 hr, in Stauffer 7700 liquid | 30 | % | ASTM D471 |
| 100% strain, 200°C, 70 hr, in Stauffer 7700 liquid | 24 | % | ASTM D471 |
| Change in Ultimate Elongation | ASTM D471 | ||
| 150°C, 168 hr, in ASTM 105 oil | -56 | % | ASTM D471 |
| 200°C, 70 hr, in Stauffer 7700 liquid | -19 | % | ASTM D471 |
| Change in Durometer Hardness | ASTM D471 | ||
| Support A, 150°C, 168 hr, in ASTM 105 oil | 5.0 | ASTM D471 | |
| Support A, 200°C, 70 hr, in Stauffer 7700 liquid | -8.0 | ASTM D471 | |
| Change in Volume | ASTM D471 | ||
| 23°C, 70 hr, Class C Standard Fuel | 3.0 | % | ASTM D471 |
| 23°C, 70 hr, methanol | 17 | % | ASTM D471 |
| 150°C, 70 hr, in ASTM 105 oil | -1.0 | % | ASTM D471 |
| 200°C, 70 hr, in Stauffer 7700 liquid | 9.0 | % | ASTM D471 |
| Additional Information |
|---|
| Nominal Viscosity, ML 1 + 10, 121°C: 25Polymer Fluorine Content: 68.5% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Baytec® MP-030 | Covestro - PUR | PUR-MDI | Baytec® |
| Kepamid® 1325GFS | Korea Engineering Plastics Co., Ltd | Nylon 6 | Kepamid® |
| KYOCERA TCG1837 | KYOCERA Chemical Corporation | TS, Unspecified | KYOCERA |
| TOTAL Polypropylene PPC 4740WZ | TOTAL Refining & Chemicals | PP Impact Copolymer | TOTAL Polypropylene |
| EcoPaXX® Q170E-H | DSM Engineering Plastics | Nylon 410 | EcoPaXX® |
