Order Products : sales@su-jiao.com
Hypel® PEHD10/.964
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Entec Polymers |
| Trademark: | Hypel® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ewEgXN_Hypel-PEHD10-964.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Hypel® PEHD10/.964 is a High Density Polyethylene material. It is available in North America. Primary attribute of Hypel® PEHD10/.964: RoHS Compliant. |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.964 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 68 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, 23°C | 27.0 | MPa | |
| Break, 23°C | 20.0 | MPa | |
| Tensile Elongation (Yield, 23°C) | 8.0 | % | ASTM D638 |
| Flexural Modulus (23°C) | 1300 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 131 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | Rate A (50°C/h), Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premi-Glas® 1200H-15 | Premix, Inc. | TS, Unspecified | Premi-Glas® |
| RTP 883 TFE 20 | RTP Company | Acetal (POM) Copolymer | RTP |
| Udel® GF-130 | Solvay Specialty Polymers | PSU | Udel® |
| Flontech® FT-915-RST | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Enviramid® N1300STHL BK | Ravago Manufacturing Americas, LLC | Nylon 66 | Enviramid® |
