Order Products : sales@su-jiao.com

Desmovit® DP LFC 9350

Category:	TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether)
Manufacturer:	geba Kunststoffcompounds GmbH
Trademark:	Desmovit®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	eriHIN_Desmovit-DP-LFC-9350.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Black, ether-based injection moulding and extrusion type

Characteristics:

Permanent antistatic properties throughout the whole structure - independent of specific environmental conditions.

Applications:

Components in the electrical and electronic industry tubes and containers for flammable liquids, films, delivery and ventilation pipes, tubes, applications in the chemical industry Sensors

General Information
Features	Antistatic
Uses	Electrical/Electronic Applications Film Industrial Containers Piping Tubing
Appearance	Black
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.24	g/cm³	ISO 1183/A

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	50		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress			ISO 527-2/200
--	12.0	MPa
10% Strain	7.00	MPa
50% Strain	11.5	MPa
100% Strain	12.0	MPa
Tensile Strain ¹(Break)	130	%	DIN 53504

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	< 4.0E+2	ohms	IEC 60093
Volume Resistivity	< 2.0E+4	ohms·cm	IEC 60093

Injection	Nominal Value	Unit
Drying Time	4.0	hr
Processing (Melt) Temp	220 to 235	°C
Mold Temperature	40.0 to 80.0	°C

Note Message
1 .	200 mm/min

Resin Grade	Manufacturer	Category	Trademark
Precision Polymer N70J	Precision Polymer Engineering Ltd.	NBR	Precision Polymer
RELENE® L60075	Reliance Industries Limited	HDPE	RELENE®
Ablebond 789-3	Henkel Ablestik	Epoxy	Ablebond
ICORENE® 1041	A. Schulman Europe	LLDPE	ICORENE®
ALTECH® PA6 A 3030/100 GB30	ALBIS PLASTIC GmbH	Nylon 6	ALTECH® PA6