Order Products : sales@su-jiao.com
APEX® 76-5179-B
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Company |
| Trademark: | APEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | erFRfU_APEX-76-5179-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
APEX®76-5179-B is a flexible polyvinyl chloride material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is injection molding. APEX®The main features of 76-5179-B are:
APEX®The typical application fields of 76-5179-B are: wire and cable |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.23 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.5 - 1.8 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 10.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 480 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | 80.0 | °C | ASTM D794 |
| Brittleness Temperature | -43.0 | °C | ASTM D746 |
| RTI Elec | UL 746 | ||
| 1.00 mm | 90.0 | °C | UL 746 |
| 3.00 mm | 90.0 | °C | UL 746 |
| RTI | UL 746 | ||
| 1.00 mm | 90.0 | °C | UL 746 |
| 3.00 mm | 90.0 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Comparative Tracking Index (CTI) (3.00 mm) | PLC 0 | UL 746 | |
| High Amp Arc Ignition (HAI) (3.00 mm) | PLC 1 | UL 746 | |
| Hot-wire Ignition (HWI) (3.00 mm) | PLC 2 | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.00 mm | V-2 | UL 94 | |
| 3.00 mm | V-2 | UL 94 | |
| Oxygen Index | 23 | % | ASTM D2863 |
| Additional Information |
|---|
| 温度额定值：80 °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 166 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 800 TFE 5 DEL | RTP Company | Acetal (POM) Homopolymer | RTP |
| SolVin 550GA | INOVYN | PVC Copolymer | SolVin |
| WPP PP PPC3TF2-Black | Washington Penn Plastic Co. Inc. | PP Copolymer | WPP PP |
| ACCUTECH™ HP0335G30CV | ACLO Compounders Inc. | PP Homopolymer | ACCUTECH™ |
| Andur 7501 DPLF/Curene® 442 | Anderson Development Company | PUR-Ether/TDI | Andur |
