Order Products : sales@su-jiao.com
Tarflen® SM-K25
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | Grupa Azoty S.A. |
| Trademark: | Tarflen® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eqgvRW_Tarflen-SM-K25.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Tarflen®SM-K25 is a polytetrafluoroethylene (PTFE) material, which contains 25% coke filler. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific,. Tarflen®The main features of the SM-K25 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 2.11 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | ||
| Vertical flow direction | 2.0 - 3.5 | % | ISO 294-4 |
| Flow direction | 3.0 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 12.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 100 | % | ISO 527-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Linear thermal expansion coefficient | ISO 11359-2 | ||
| Flow : 23 to 100°C | 1.2E-4 | cm/cm/°C | ISO 11359-2 |
| Lateral : 23 to 100°C | 7.0E-5 | cm/cm/°C | ISO 11359-2 |
| Extrusion instructions |
|---|
| Molding Pressure: 40 to 60 MpaMolding Temperature: 370 °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VENELENE® 11PG1 | Poliolefinas Internacionales, C.A. (Polinter) | LLDPE | VENELENE® |
| AMTOPP HM18 | Inteplast Group | PP, Unspecified | AMTOPP |
| FRIANYL® C3 H V0 | Nilit Plastics | Nylon 66/6 | FRIANYL® |
| POCAN® B 7616 000000 | LANXESS Corporation | PC+PBT | POCAN® |
| ULTEM™ DT1810EV resin | SABIC Innovative Plastics | PEI | ULTEM™ |
