Order Products : sales@su-jiao.com
Filter-bond™ R-30-6-1
| Category: | TS, Unspecified , Thermoset, Unspecified |
| Manufacturer: | Hapco Inc. |
| Trademark: | Filter-bond™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | em5VMg_Filter-bond-R-30-6-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Filter-bond is a series of casting and potting compounds ideally suited for medical and food contact applications. This Filter-bond R-SERIES is manufactured to ultra-high quality standards and has been used by customers to pass biocompatibility requirements. The FILTER-bond R-30-6 Series feature 3 potting and adhesive systems specifically designed for potting and/or bonding Ultrafiltration products. The FILTER-bond R-30-6 Series DO NOT CONTAIN AROMATIC AMINES or other carcinogenic or mutenogenic materials. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D4669 |
| Molding Shrinkage - Flow | 0.15 to 0.30 | % | ASTM D2566 |
| Weight - per cubic inch | 19 | g |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | 152 | °C | ASTM D648 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gel Time (25°C) 1 | 21.0 to 31.0 | min | ASTM D2971 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cure Time | Internal Method | ||
| 21°C | 1.0 | day | |
| 80°C | 0.3 to 0.4 | day |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 80 to 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3100 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 85.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.9 | % | ASTM D638 |
| Flexural Modulus | 3360 | MPa | ASTM D790 |
| Flexural Strength | 101 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 17 | J/m | ASTM D256 |
| Unnotched Izod Impact | 31 | J/m | ASTM D256 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100, Mix Ratio by Volume: 100 | ||
| Part B | Mix Ratio by Weight: 20, Mix Ratio by Volume: 20 | ||
| Thermoset Mix Viscosity (25°C) | 11000 to 17000 | cP | ASTM D4878 |
| Note Message | |
|---|---|
| 1 . | 100 g |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| 3M™ Dyneon™ TFM™ Modified PTFE Compound TFM 4105 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ TFM™ Modified PTFE Compound |
| Cosmic DAP K66/6230F | Cosmic Plastics, Inc. | DAP | Cosmic DAP |
| Curv™ C100A | Propex Fabrics | PP, Unspecified | Curv™ |
| Grilamid® XE 4108 nat | EMS-GRIVORY | Nylon 6/12 | Grilamid® |
| Hyundai EP PPC HP310 | HYUNDAI EP Co., Ltd. | PP Copolymer | Hyundai EP PPC |
