Order Products : sales@su-jiao.com
InnoPlus HD2408J
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | PTT Global Chemical Public Company Limited |
| Trademark: | InnoPlus |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | elBEew_InnoPlus-HD2408J.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
InnoPlus HD2408J is high density polyethylene grade specially designed for high UV resistant requirement. It also exhibits high impact strength and good weathering resistance, suitable for outdoor applications. Typical Application: Crates, Pallets, Garbage bins, Industrial tubes, Fruit baskets, outdoor applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.964 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.5 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (25% Igepal, F50) | 2.00 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 30.4 | MPa | |
| Break | 11.8 | MPa | |
| Tensile Elongation (Break) | 750 | % | ASTM D638 |
| Apparent Bending Modulus | 1080 | MPa | ASTM D747 |
| Flexural Modulus | 1570 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 1 | 29 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 124 | °C | ASTM D1525 2 |
| Melting Temperature | 131 | °C | ASTM D3418 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 170 to 200 | °C | |
| Cylinder Zone 2 Temp. | 170 to 200 | °C | |
| Cylinder Zone 3 Temp. | 170 to 200 | °C | |
| Cylinder Zone 4 Temp. | 170 to 200 | °C | |
| Cylinder Zone 5 Temp. | 170 to 200 | °C | |
| Die Temperature | 180 to 195 | °C |
| Note Message | |
|---|---|
| 1 . | Complete break |
| 2 . | Rate A (50°C/h), Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEETEC EVA VS420 | Lotte Chemical Corporation | EVA | SEETEC EVA |
| Texalan® 5 Series 564D | Austin Novel Materials Co. Ltd. | TPU-Polyester | Texalan® 5 Series |
| Daplen™ EE189HP | Borealis AG | TPO | Daplen™ |
| Latamid 66 MDT05-01 | LATI S.p.A. | Nylon 66 | Latamid |
| ESTOPLAST XU 150BB10 | Ester Industries Ltd. | Nylon 6 | ESTOPLAST XU |
