Order Products : sales@su-jiao.com
OnFlex™ S EF 80A-3S1977
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | PolyOne Corporation |
| Trademark: | OnFlex™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | egdSet_OnFlex-S-EF-80A-3S1977.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| OnFlex™-S EF thermoplastic elastomer polymer is mixed with hydrogenated styrene block copolymer. In addition to having OnFlex™The main characteristics of-S products, such as high hardness, good mechanical properties, good processability, good coloring properties, and a large operating temperature range, this series of polymers has excellent mechanical properties and processability. OnFlex™-S EF polymer is semi-filled, so it is opaque and has a medium density. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.980 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 145 | mm³ | DIN 53516 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| General Material Type | Styrene thermoplastic elastomers (TES) |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| 100% strain | 4.60 | MPa | ISO 37 |
| 300% strain | 6.00 | MPa | ISO 37 |
| Tensile Stress (Break) | 12.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 700 | % | ISO 37 |
| Tear Strength | 42 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 30 | % | ISO 815 |
| 70°C, 22 hr | 65 | % | ISO 815 |
| 100°C, 22 hr | 91 | % | ISO 815 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| 各项属性值是采用注射模制基板测量得出。 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 - 220 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C | |
| Injection Rate | Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| APEX® 80862 | Teknor Apex Company | PVC, Semi-Rigid | APEX® |
| Asiga® PlasGRAY | Asiga | Unspecified | Asiga® |
| Di-Pak™ R-4806 | Hapco Inc. | TP, Unspecified | Di-Pak™ |
| Hyundai EP Adhesives VE750S/1002 | HYUNDAI EP Co., Ltd. | EVA | Hyundai EP Adhesives |
| POLYfill PPH 150DNH | Polykemi AB | PP Homopolymer | POLYfill |
