Order Products : sales@su-jiao.com
DynaMix Lite™ 3244-GHIL
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | Polymer Dynamix |
| Trademark: | DynaMix Lite™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | egdNhZ_DynaMix-Lite-3244-GHIL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Glass Filled Impact Modified PEEK Features:
Applications:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.43 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.10 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 100 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 6.2 | % | ASTM D638 |
| Flexural Modulus | 4830 | MPa | ASTM D790 |
| Flexural Strength | 124 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 100 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 135 to 149 | °C | |
| Drying Time | 3.0 to 5.0 | hr | |
| Rear Temperature | 357 to 374 | °C | |
| Middle Temperature | 363 to 377 | °C | |
| Front Temperature | 368 to 382 | °C | |
| Nozzle Temperature | 368 to 382 | °C | |
| Processing (Melt) Temp | 368 to 382 | °C | |
| Mold Temperature | 177 to 204 | °C | |
| Injection Rate | Moderate | ||
| Screw Speed | 20 to 100 | rpm | |
| Clamp Tonnage | 5.5 to 8.3 | kN/cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 285 TFE 10 SI 2 | RTP Company | Nylon 66 | RTP |
| RTP ESD 300 EM | RTP Company | PC | RTP |
| Forprene® 6NM901A40 | SO.F.TER. SPA | TPV | Forprene® |
| Geon™ Vinyl Flexible A85U65 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| ORTHTEK® RP | Greene, Tweed & Co. | PEEK | ORTHTEK® |
