Order Products : sales@su-jiao.com
UBESTA 3024GC6
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | UBE Industries, Ltd. |
| Trademark: | UBESTA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | egSDfd_UBESTA-3024GC6.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Reinforced with glass fiber |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Part Marking Code |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.24 | g/cm³ | ISO 1183 |
| Molding Shrinkage | Internal Method | ||
| Across Flow | 0.80 | % | |
| Flow | 0.20 | % | |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.40 | % | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 115 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 7.0 | % | ISO 527-2 |
| Flexural Modulus | 5800 | MPa | ISO 178 |
| Flexural Stress | 170 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 30 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 177 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 160 | °C | ISO 75-2/A |
| CLTE - Flow | 3.0E-5 | cm/cm/°C | ISO 11359-2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Resinoid 7201 | Resinoid Engineering Corporation | Phenolic | Resinoid |
| SLOVAMID® 66/6 GF 20 | Plastcom | Nylon 66/6 | SLOVAMID® 66/6 |
| TECAPEEK® TS | Ensinger Inc. | PEEK | TECAPEEK® |
| VENYL ST228 - 7935 | AD majoris | Nylon 6 | VENYL |
| Infino HN-3102G | SAMSUNG SDI CO., LTD. | PC | Infino |
