Order Products : sales@su-jiao.com
PermaStat® 603 FR
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | RTP Company |
| Trademark: | PermaStat® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | egDenv_PermaStat-603-FR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. PermaStat® 600 FR Series materials are flame retardant ABS with a permanent anti-static additive. The products are non-migrating, independent of humidity and non-sloughing. The products meet static decay requirements of MIL B-80705C. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| UL File Number |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.44 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.10 - 0.30 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 4480 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 48.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.0 | % | ASTM D638 |
| Flexural Modulus | 4340 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 72.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 48 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 240 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 93.0 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+10 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+9 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.52 mm, ALL, Values per RTP Company testing.) | V-0 | UL 94 |
| Additional Information |
|---|
| Molding Shrinkage, ASTM D 955, 3.175mm: 1-3mm/mTensile Elongation, ASTM D 638: 1-3%Static Decay, FTMS-4046.1, Mil B-81705C: <2.0 secondsVolume Resistivity, ASTM D 257: 1000000000 - 10000000000 ohm-cmSurface Resistivity, ASTM D 257: 10000000000 - 100000000000 ohm/sq |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 216 - 249 | °C | |
| Middle Temperature | 216 - 249 | °C | |
| Front Temperature | 216 - 249 | °C | |
| Mold Temperature | 66.0 - 93.0 | °C | |
| Injection Pressure | 68.9 - 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NaturePlast PEVE 012 | NaturePlast | LDPE | NaturePlast |
| APEX® 4109 | Teknor Apex Company | PVC, Flexible | APEX® |
| APEX® 82-E419-A | Teknor Apex Company | PVC, Flexible | APEX® |
| ESTACARB 2060 V0 | Cossa Polimeri S.r.l. | PC | ESTACARB |
| KMI PP KM-503IB | KMI Group, Inc. | PP Impact Copolymer | KMI PP |
