Order Products : sales@su-jiao.com
PRIMALENE WPP702
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Southern Polymer, Inc. |
| Trademark: | PRIMALENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | efytdR_PRIMALENE-WPP702.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
A blow molding grade high density polyethylene Applications:
Features:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.954 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.30 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal) | 25.0 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 28.0 | MPa | |
| Break | 14.0 | MPa | |
| Tensile Elongation (Break) | 560 | % | ASTM D638 |
| Flexural Modulus - Tangent | 1310 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | 189 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -76.1 | °C | ASTM D746 |
| Vicat Softening Temperature | 127 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AFFINITY™ PL 1280G | The Dow Chemical Company | POP | AFFINITY™ |
| DENITER 3010 | Vamp Tech | PBT | DENITER |
| DJSilicone NE--D-1/NE-D-1U | DONGJUE SILICONE (NANJING) CO., LTD | Silicone | DJSilicone |
| Orevac® 18345 RNP | Arkema | EPE | Orevac® |
| ULTEM™ CRS5011 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
