Order Products : sales@su-jiao.com

EVALENE® PP PHT0171

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	JG Summit Petrochemical Corporation
Trademark:	EVALENE® PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ecxeIY_EVALENEPPPHT0171.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

EVALENE® PHT0171 is specifi cally developed for thermoforming and is intended for use in a broad range of extrusion applications requiring high impact strength and good stiffness. This resin is fully formulated with a nucleating agent resulting in improved cycle times as well as opportunities for enhanced end-product appearance. EVALENE® PHT0171 is ideal for containers requiring hot-fi ll and microwave compatibility.

FEATURES

High Izod Impact strength

Good stiffness

Good cycle times

Good transparency

Meets Philippine FDA food contact requirements

Halal-certified

TYPICAL APPLICATIONS

Food Packaging Trays and Containers

Drinking Cups

Dunnage Trays

Rigid Sheets

General Information
Additive	Nucleating agent
Features	Good Clarity Nucleated Rigid, good Homopolymer Impact resistance, high Good toughness Compliance of Food Exposure
Uses	Cup Sheet Container Food packaging
Forms	Particle
Processing Method	Extrusion Thermoforming

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	1.7	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	103		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus - 1% Secant ¹	2410	MPa	ASTM D638
Tensile Strength ²			ASTM D638
Yield	38.0	MPa	ASTM D638
Fracture	18.0	MPa	ASTM D638
Tensile Elongation ³			ASTM D638
Yield	13	%	ASTM D638
Fracture	65	%	ASTM D638
Flexural Modulus - 1% Secant ⁴	1470	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact ⁵(23°C)	18	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	120	°C	ASTM D648
Melting Temperature ⁶	162	°C

Extrusion	Nominal Value	Unit
Melt Temperature	200 - 250	°C

Note Message
1 .	5.0 mm/min
2 .	50 mm/min
3 .	50 mm/min
4 .	1.3 mm/min
5 .	Partial Break
6 .	DSC, 10°C/min, 2nd heating

Resin Grade	Manufacturer	Category	Trademark
VECTOR® 6507	Dexco Polymers LP	SBS	VECTOR®
alphalon™ E 40 L	Grupa Azoty ATT Polymers GmbH	Nylon 6	alphalon™
LubriOne™ AT-000/2M NC073	PolyOne Corporation	Acetal (POM) Copolymer	LubriOne™
PLUSTEK RA115	Polyram Ram-On Industries	Nylon 66	PLUSTEK
Enable™ 20-05 Series	ExxonMobil Chemical	mPE	Enable™