Order Products : sales@su-jiao.com

Rigidex® HM5060XA

Category:	HDPE, HMW , High Density (HMW) Polyethylene
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	Rigidex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ecUEut_Rigidex-HM5060XA.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Rigidex® HM5060XA is a high molecular weight grade supplied with an optimum blend of properties for the production of medium-large blow moulded articles.

Typical applications

High performance blow moulded containers typically 5-150 litres capacity for packaging aggressive products, especially where approvals are required to UN recommendations for Dangerous Goods and RID/ADR Compatibility testing

Benefits and Features

Enhanced environmental stress crack resistance

Very high chemical resistance

High impact strength

Good rigidity

Excellent processability on a wide range of blow moulding equipment

General Information
Features	Good Chemical Resistance Good Processability High ESCR (Stress Crack Resist.) High Impact Resistance High Molecular Weight Medium Rigidity
Uses	Blow Molding Applications Blown Containers
RoHS Compliance	Contact Manufacturer
Forms	Pellets
Processing Method	Blow Molding

Physical	Nominal Value	Unit	Test Method
Density	0.950	g/cm³	ISO 1872
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)	6.0	g/10 min	ISO 1133
Environmental Stress-Cracking Resistance			ASTM D1693A
50°C, 10% Adinol	500	hr
50°C, 100% Adinol	> 1000	hr

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress ¹(Yield, 23°C)	26.0	MPa	ISO 527-2/2
Tensile Strain ²(Break, 23°C)	> 500	%	ISO 527-2/2
Flexural Modulus ³(23°C)	1000	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Unnotched Impact Strength	No Break		ISO 179

Additional Information	Nominal Value	Unit	Test Method
Bottle Stress Crack Resistance (60°C)	8.3	day	Internal Method

Note Message
1 .	Speed D
2 .	Speed D
3 .	100 mm/min

Resin Grade	Manufacturer	Category	Trademark
SCHULABLEND® (ASA/PA) M/MW SF UV	A. Schulman Europe	ASA+Nylon	SCHULABLEND®
VisiJet® M3 Stoneplast	3D Systems	Unspecified	VisiJet®
Baydur® 645 (30 pcf)	Covestro - PUR	PUR-MDI	Baydur®
Kepamid® 2325GVS	Korea Engineering Plastics Co., Ltd	Nylon 66	Kepamid®
MACOMASS TPE MM-TPE V 5040	MACOMASS Verkaufs AG	TPE	MACOMASS TPE