Tecnoflon® FOR 7380K

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	eb9nU3_Tecnoflon-FOR-7380K.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® FOR 7380K is a medium viscosity cure incorporated fluoroelastomer terpolymer (FKM) with 68 % fluorine content. Tecnoflon® FOR 7380K is designed to improve bonding in any application requiring adhesion to metal. In shaft seals or valve stem seals production, Tecnoflon® FOR 7380K greatly reduces the reject rate due to adhesion and molding problems. Tecnoflon® FOR 7380K contains a new curing system and proprietary special processing aid, providing superior processability for fast cycles and scorch safety. Some of the basic properties of Tecnoflon® FOR 7380K are: Very good flow Superior rubber-to-metal bond Lack of mould fouling Excellent hot tear resistance Tecnoflon® FOR 7380K can be used for compression, injection and transfer molding of shaft seals, valve stem seals, O-rings, gaskets and seals. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Tecnoflon® FOR 7380K can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers.

Message

TECNOFLON® FOR 7380K is a medium viscosity cure incorporated fluoroelastomer terpolymer (FKM) with 68 % fluorine content. Tecnoflon® FOR 7380K is designed to improve bonding in any application requiring adhesion to metal. In shaft seals or valve stem seals production, Tecnoflon® FOR 7380K greatly reduces the reject rate due to adhesion and molding problems. Tecnoflon® FOR 7380K contains a new curing system and proprietary special processing aid, providing superior processability for fast cycles and scorch safety.

Some of the basic properties of Tecnoflon® FOR 7380K are:

Very good flow

Superior rubber-to-metal bond

Lack of mould fouling

Excellent hot tear resistance

Tecnoflon® FOR 7380K can be used for compression, injection and transfer molding of shaft seals, valve stem seals, O-rings, gaskets and seals. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Tecnoflon® FOR 7380K can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers.

General Information
Additive	Processing Aid
Features	Bondability Fast Molding Cycle Good Adhesion Good Flow Good Mold Release Good Processability Good Tear Strength Medium Viscosity Terpolymer
Uses	Belts/Belt Repair Blending Gaskets Hose Profiles Seals Sheet Valves/Valve Parts
Appearance	Off-White
Forms	Slab
Processing Method	Calendering Compounding Compression Molding Extrusion Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	32	MU
Fluorine Content ²	68	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
RTP 1400 GB 20	RTP Company	PESU	RTP
Sindustris PP H7412	Sincerity Australia Pty Ltd.	PP, Unspecified	Sindustris PP
Braskem PP FP450WV	Braskem America Inc.	PP Homopolymer	Braskem PP
Exelene® LDPE 0700	Montachem International, Inc.	LDPE	Exelene® LDPE
FRIANYL® A3 GF35 V0	Nilit Plastics	Nylon 66	FRIANYL®