Order Products : sales@su-jiao.com
Generic PP+EPDM
| Category: | PP+EPDM , Polypropylene + EPDM Rubber |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eZAH8u_Generic-PP-EPDM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PP+EPDM This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 0.945 - 0.995 | g/cm³ | ASTM D792 |
| 23°C | 0.932 - 0.984 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow (23°C) | 2.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | |||
| 23°C | 39 - 92 | ASTM D2240 | |
| 23°C | 40 - 91 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | |||
| 100% strain, 23°C | 1.00 - 5.25 | MPa | ASTM D412 |
| 100% strain, 23°C | 1.00 - 12.0 | MPa | ISO 37 |
| 300% strain, 23°C | 1.50 - 6.60 | MPa | ASTM D412 |
| 300% strain, 23°C | 2.30 - 5.24 | MPa | ISO 37 |
| Tensile Strength | |||
| Yield, 23°C | 3.20 - 13.1 | MPa | ASTM D412 |
| Yield, 23°C | 4.00 - 16.1 | MPa | ISO 37 |
| Fracture, 23°C | 4.00 - 16.3 | MPa | ASTM D412 |
| Fracture, 23°C | 3.50 - 12.1 | MPa | ISO 37 |
| Tensile Elongation | |||
| Fracture, 23°C | 350 - 600 | % | ASTM D412 |
| Fracture, 23°C | 300 - 680 | % | ISO 37 |
| Tear Strength | |||
| 23°C | 19.0 - 68.0 | kN/m | ASTM D624 |
| 23°C | 5.0 - 79 | kN/m | ISO 34-1 |
| Compression Set | 23 - 62 | % | ASTM D395 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | |||
| -- | -60.0 - -55.0 | °C | ASTM D746 |
| -- | -55.3 - -55.0 | °C | ISO 974 |
| -- | -60.3 - -51.0 | °C | ISO 812 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79.5 - 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Nozzle Temperature | 219 - 220 | °C | |
| Processing (Melt) Temp | 189 - 210 | °C | |
| Mold Temperature | 37.3 - 45.0 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PP+EPDMThis information is provided for comparative purposes only. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Time | 2.0 - 3.0 | hr | |
| Melt Temperature | 185 - 200 | °C | |
| Die Temperature | 190 - 215 | °C |
| Extrusion instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PP+EPDMThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUSTAPEEK GLD 140 FG natural | Röchling Sustaplast SE & Co. KG | PEEK | SUSTAPEEK |
| Anjacom® R250-GF30 | Almaak International GmbH | Nylon 6 | Anjacom® |
| Eltex® B4020N1343 | INEOS Olefins & Polymers Europe | HDPE Copolymer | Eltex® |
| Escorene™ Ultra UL 00728 | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| TABOREN® PH 89 T 20-075 | SILON s.r.o. | PP Homopolymer | TABOREN® |
