Order Products : sales@su-jiao.com
Generic Nylon 66/6 - Mineral
| Category: | Nylon 66/6 , Polyamide 66/6 Copolymer |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eXeHt2_Generic-Nylon-66-6---Mineral.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Nylon 66/6 - Mineral This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.35 - 1.38 | g/cm³ | ISO 1183 |
| Molding Shrinkage (23°C) | 0.38 - 1.4 | % | ISO 294-4 |
| Water Absorption | ISO 62 | ||
| Saturated, 23°C | 5.8 - 7.0 | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 1.8 - 2.0 | % | ISO 62 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ball Indentation Hardness | 180 - 191 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 5060 - 8540 | MPa | ISO 527-2 |
| Tensile Stress (Break, 23°C) | 74.2 - 92.5 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 2.0 - 7.2 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 3.8 - 8.2 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | 30 - 71 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 110 - 250 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 85.7 - 192 | °C | ISO 75-2/A |
| Continuous Use Temperature | 108 - 220 | °C | ASTM D794 |
| Melting Temperature (DSC) | 243 - 260 | °C | ISO 3146 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength (23°C) | 25 - 32 | kV/mm | IEC 60243-1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 80.5 | °C | |
| Drying Time | 3.0 - 3.2 | hr | |
| Processing (Melt) Temp | 275 - 295 | °C | |
| Mold Temperature | 80.0 - 80.5 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic Nylon 66/6 - MineralThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ravathane R210A80UV | RAVAGO Kimya Plastik Sanayi ve Ticaret A.S. | TPU-Polyether | Ravathane |
| RheTech Polypropylene GC20P255-01 | RheTech, Inc. | PP Copolymer | RheTech Polypropylene |
| Sindustris ABS LXG679 | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| Galloo GP-PP-78T10 | Galloo Plastics | PP, Unspecified | Galloo |
| NHU-PPS 1130C | Zhejiang NHU Comp. Ltd. | PPS | NHU-PPS |
