Order Products : sales@su-jiao.com
Epoxies, Ect. 20-1650
| Category: | Silicone , Silicone |
| Manufacturer: | Epoxies, Etc. |
| Trademark: | Epoxies, Ect. |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eRYal0_Epoxies-Ect-20-1650.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
20-1650 is a two component silicone elastomer designed for high temperature applications. Silicones offer thermal stability at high operating temperatures, but the 20-1650 is formulated with iron oxide to impart increased stability at elevated temperatures. It has a simple 1:1 mix ratio. 20-1650 can be used for potting or encapsulating electronic packages that have sensitive components. Due to its low stress during and after cure, this material will not crush or damage delicate components. 20-1650 is formulated without solvents or other toxic materials. It is therefore not regulated or considered hazardous for transportation. Features:
Benefits:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow | 2.0E-4 | cm/cm/°C | |
| Thermal Conductivity | 0.16 | W/m/K |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Mix Viscosity (25°C) | 7100 | cP |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Operating Temperature | -65.0 to 300 | °C |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | |||
| -- 1 | Clear/Transparent | ||
| -- 2 | Red | ||
| Mix Ratio by Weight (PBW) | |||
| Part A | 1.0 | ||
| Part B | 1.0 | ||
| Mix Ratio by Volume (PBV) | |||
| Part A | 1.0 | ||
| Part B | 1.0 | ||
| Density | |||
| 25°C 3 | 1.03 | g/cm³ | |
| 25°C 4 | 1.04 | g/cm³ | |
| Viscosity | |||
| 25°C 5 | 6.5 | Pa·s | |
| 25°C 6 | 7.5 | Pa·s | |
| Curing Time | |||
| 150°C | 0.33 | hr | |
| 100°C | 1.0 | hr | |
| 65°C | 2.0 to 4.0 | hr | |
| 25°C | 24 to 48 | hr | |
| Shelf Life | 6 | month |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 30 | ||
| Tensile Strength | 1.03 | MPa | |
| Tensile Elongation at Break | 250 | % | |
| Tear Strength | 3.50 | kN/m | |
| Electric Strength | 18 | kV/mm | |
| Relative Permittivity (100 Hz) | 3.10 | ||
| Volume Resistivity (25°C) | 1.0E+14 | ohms·cm |
| Note Message | |
|---|---|
| 1 . | Part B |
| 2 . | Part A |
| 3 . | Part B |
| 4 . | Part A |
| 5 . | Part B |
| 6 . | Part A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vi-Chem PVC V330-70BM | Vi-Chem Corporation | PVC, Unspecified | Vi-Chem PVC |
| ADDINYL B2 V20 | ADDIPLAST | Nylon 6 | ADDINYL |
| Dutral® PM 8273 | Versalis S.p.A. | EPDM | Dutral® |
| Leona™ FR370 | Asahi Kasei Chemicals Corporation | Nylon 66 | Leona™ |
| KMI PP KM-047IB | KMI Group, Inc. | PP Impact Copolymer | KMI PP |
