Order Products : sales@su-jiao.com
Alkathene® LD6622
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Alkathene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eO55D6_Alkathene-LD6622.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Alkathene® LD6622 is a high flow injection moulding grade of low density polyethylene. Alkathene® LD6622 is intended for use in the production of thin-walled injection mouldings. Alkathene® LD6622 is not recommended for high stress crack resistance applications. Suitability for use in any application should be determined by appropriate performance testing. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 70 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (10% Igepal CO-630, F50) | < 1.00 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 53 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 12.0 | MPa | ASTM D638 |
| Flexural Modulus - 1% Secant | 270 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | 112 | °C | ASTM D3418 |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RIALGLASS C 07 S 30 G | RIALTI Srl | PP Copolymer | RIALGLASS |
| ASTAMID™ MB3EG3 | Marplex Australia Pty. Ltd. | Nylon 6 | ASTAMID™ |
| ASTALOY™ PC/ABS A800LG | Marplex Australia Pty. Ltd. | PC+ABS | ASTALOY™ |
| AZDEL™ C401B02N | Azdel, Inc. | PP Alloy | AZDEL™ |
| Dynaprene® VE5087A | Nantex Industry Co., Ltd. | TPE | Dynaprene® |
