Order Products : sales@su-jiao.com
IPC PP 4810H-GF Black
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | International Polymers Corporation |
| Trademark: | IPC PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eKDV5h_IPC-PP-4810H-GF-Black.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| IPC PP 4810H-GF Black is a polypropylene material, and the filler is 10% glass fiber reinforced material. This product is available in North America,. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.970 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 13 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.0 - 1.4 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 38.6 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 10 | % | ASTM D638 |
| Flexural Modulus | 2210 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 53 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 145 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 130 | °C | ASTM D648 |
| Additional Information |
|---|
| Density - Specific Gravity, ASTM D792: 0.97 ± 0.02 g/cm³Melt Mass-Flow Rate, ASTM D1238, 230°C/2.16 kg: 12.0 to 14.0 g/10 minTensile Elongation @ Yld, ASTM D638: 10.0 ± 1.0%Filler, FLTM BO 6-2: 10% ±2% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTV-2 GI-384 | Silicones, Inc. | Silicone Rubber, RTV-2 | RTV-2 |
| SABIC® HDPE M80063 | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® HDPE |
| Wellamid® GFT1699-WBK1 | Wellman Engineering Resins | Nylon 66 | Wellamid® |
| 3M™ Dyneon™ Fluoroelastomer FC 2230 | 3M Advanced Materials Division | Fluorelastomer | 3M™ Dyneon™ Fluoroelastomer |
| POLYFLON™ D-2 | DAIKIN AMERICA, INC. | PTFE | POLYFLON™ |
