Order Products : sales@su-jiao.com
Megalloy® PPO-GF30
| Category: | PPE+PS , Polyphenylene Ether + PS |
| Manufacturer: | Mega Polymers |
| Trademark: | Megalloy® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eHz6Qh_Megalloy-PPO-GF30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Injection grade, PPE-PS alloy with 30% glass fiber reinforcement |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.29 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/5.0 kg) | 10 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 0.10 to 0.30 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 96.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.0 | % | ASTM D638 |
| Flexural Modulus | 6890 | MPa | ASTM D790 |
| Flexural Strength | 173 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 100 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 154 | °C | |
| 1.8 MPa, Unannealed | 138 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | HB | ||
| 3.00 mm | HB |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TES J-80/10 | Techmer Engineered Solutions | Acetal (POM) Copolymer | TES |
| VENELENE® 2811 | Poliolefinas Internacionales, C.A. (Polinter) | HDPE | VENELENE® |
| Nylfor® A2 GFCF/30 NERO | SO.F.TER. SPA | Nylon 66 | Nylfor® |
| PLUSTEK RD302G6 | Polyram Ram-On Industries | Nylon 12 | PLUSTEK |
| Hifax CA 1110 G4 LS/4 1740 | LyondellBasell Industries | PP Copolymer | Hifax |
