Order Products : sales@su-jiao.com
OPNYL OP66GF13
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Ovation Polymers Inc. |
| Trademark: | OPNYL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eGsuhW_OPNYL-OP66GF13.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Nylon 66 - Glass reinforced (13 %), high tensile strength, stiffness and HDT. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow : 3.17 mm | 0.10 to 0.20 | % | |
| Across Flow : 3.17 mm | 1.0 to 1.3 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 3900 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 100 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 3.5 | % | ASTM D638 |
| Flexural Modulus 4(50.0 mm Span) | 5000 | MPa | ASTM D790 |
| Flexural Strength 5(Yield, 50.0 mm Span) | 130 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 35 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 3.20 mm | 240 | °C | |
| 1.8 MPa, Unannealed, 3.20 mm | 235 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RJM TPS-G 35A | RJM International, Inc. | TPE | RJM |
| TAISOX 7440M | Formosa Plastics Corporation | EVA | TAISOX |
| elitel UE3220 | UNITIKA Plastics Division | TPC-ET | elitel |
| Sylvin 8600-85 Yellow 4173 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| MAXAMID™ PA6G15L-NC010 | Pier One Polymers, Inc. | Nylon 6 | MAXAMID™ |
