FlexFoam-It® III

Category:	PUR, Unspecified , Polyurethane
Manufacturer:	Smooth-On, Inc
Trademark:	FlexFoam-It®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	eD6CgN_FlexFoam-It-III.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Smooth-On's FlexFoam-iT!® Series consists of two-component flexible foams that are versatile and easy to use. Parts A and B are mixed and poured into a mold or other form (apply release agent if necessary). FlexFoam-iT!® III is mixed 1A:2B by volume, expands 15 times its original volume and develops a uniform 3 lb./cu. ft. cell structure. FlexFoam-iT!® V is mixed 1A:1B by volume, expands 10 times its original volume and develops a uniform 5 lb./cu. ft. cell structure. FlexFoam-iT!® X is mixed 1A:1B by volume, expands 6 times its original volume and develops a uniform 10 lb./cu. ft. cell structure. FlexFoam-iT!® 17 and FlexFoam-iT!® 25 are "self-skinning" - they develop a tough skin that will reproduce fine mold texture. FlexFoam-iT!® 17 is mixed 1A:2B by volume, expands 3.5 times its original volume and develops a uniform 17 lb/cu. ft cell structure. FlexFoam-iT!® 25 is mixed 1A:2B by weight, expands 2 times its original volume and develops a uniform 25 lb/cu. ft cell structure. FlexFoam-iT!® Series foams expand to full volume in 5 minutes, develop handling strength in 30 minutes and fully cure in 2 hours. Vibrant colors can be achieved by adding SO-Strong® color tints. FlexFoam-iT!® products can be used for a variety of arts & crafts, industrial and special effects applications including padding/cushion material, gasket material and scenic design.

Message

Smooth-On's FlexFoam-iT!® Series consists of two-component flexible foams that are versatile and easy to use. Parts A and B are mixed and poured into a mold or other form (apply release agent if necessary). FlexFoam-iT!® III is mixed 1A:2B by volume, expands 15 times its original volume and develops a uniform 3 lb./cu. ft. cell structure. FlexFoam-iT!® V is mixed 1A:1B by volume, expands 10 times its original volume and develops a uniform 5 lb./cu. ft. cell
structure. FlexFoam-iT!® X is mixed 1A:1B by volume, expands 6 times its original volume and develops a uniform 10 lb./cu. ft. cell structure.

FlexFoam-iT!® 17 and FlexFoam-iT!® 25 are "self-skinning" - they develop a tough skin that will reproduce fine mold texture. FlexFoam-iT!® 17 is mixed 1A:2B by volume, expands 3.5 times its original volume and develops a uniform 17 lb/cu. ft cell structure. FlexFoam-iT!® 25 is mixed 1A:2B by weight, expands 2 times its original volume and develops a uniform 25 lb/cu. ft cell structure. FlexFoam-iT!® Series foams expand to full volume in 5 minutes, develop handling strength in 30 minutes and fully cure in 2 hours. Vibrant colors can be achieved by adding SO-Strong® color tints.

FlexFoam-iT!® products can be used for a variety of arts & crafts, industrial and special effects applications including padding/cushion material, gasket material and scenic design.

General Information
Features	Foamable Good Colorability Good Flexibility Good Surface Finish
Uses	Foam Gaskets Industrial Applications Shock Absorbing Pads
Appearance	White
Processing Method	Casting

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.0599	g/cm³	ASTM D1475
Specific Volume	14.5 to 16.3	cm³/g

Additional Information	Nominal Value	Unit
Handling Strength	30.0	min
Mixing Ratio	57.5A:100B by weight 1A:2B by volume
Volumetric Expansion	15 times

Physical	Nominal Value	Unit	Test Method
Apparent Density	0.05	g/cm³

Thermoset	Nominal Value	Unit	Test Method
Pot Life	0.58	min	ASTM D2471
Thermoset Mix Viscosity	1000	cP	ASTM D2393
Demold Time	120	min

Resin Grade	Manufacturer	Category	Trademark
Sinelec CCB6005	Teknor Apex Asia Pacific PTE. LTD.	PS (Specialty)	Sinelec
Dryflex® 600550S	ELASTO	SEBS	Dryflex®
Hanwha Total PE P200CB	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	HDPE	Hanwha Total PE
Lucopren® SE 1522-45FS	Lucobit AG	SEPS	Lucopren®
OPTODYNE™ UV-3000	DAIKIN AMERICA, INC.	Epoxy	OPTODYNE™