Order Products : sales@su-jiao.com
ISPLEN® PM 364 AT
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | REPSOL |
| Trademark: | ISPLEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | e9wUlq_ISPLEN-PM-364-AT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polypropylene copolymer, 30% mineral fillers reinforced and high melt flow rate. ISPLEN® PM364 AT gives a good compromise between stiffness and impact strength, a low warpage and shrinkage behaviour. The product is high heat stabilised. APPLICATIONS
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.13 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 9.0 | g/10 min | ISO 1133 |
| Molding Shrinkage 1 | 0.60 to 0.90 | % | ISO 2577 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, 15 sec) | 60 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 24.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 3.0 | % | ISO 527-2 |
| Flexural Modulus | 3200 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | ISO 180 | ||
| -20°C | 2.0 | kJ/m² | |
| 0°C | 5.0 | kJ/m² | |
| 23°C | 7.5 | kJ/m² | |
| Unnotched Izod Impact Strength | ISO 180 | ||
| 0°C | 20 | kJ/m² | |
| 23°C | 60 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 115 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 61.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | |||
| -- | 146 | °C | ISO 306/A120 |
| -- | 67.0 | °C | ISO 306/B120 |
| Note Message | |
|---|---|
| 1 . | 150x100x3mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMOFIN PPH300G8 | Polyram Ram-On Industries | PP Homopolymer | RAMOFIN |
| BONDYRAM® 6000 | Polyram Ram-On Industries | ABS | BONDYRAM® |
| DENILEN B 3040 CB T | Vamp Tech | PP, Unspecified | DENILEN |
| DINALON® PA 6 30% FV | Grupo Repol | Nylon 6 | DINALON® |
| Zytel® 70G30HSLR NC010 | DuPont Performance Polymers | Nylon 66 | Zytel® |
