Order Products : sales@su-jiao.com
Spartech Polycom PE2A-005
| Category: | HDPE, HMW , High Density (HMW) Polyethylene |
| Manufacturer: | Spartech Polycom |
| Trademark: | Spartech |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | e7qqUB_Spartech-Polycom-PE2A-005.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| High Impact Polypropylene compound offers an increased level of impact over homopolymer polypropylene while providing good stiffness and strengh properties. This product is well suited for both injection molding and extrusion processes. A spartech Polycom representative can provide further information on thes and other Spartech Polycom products. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.918 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 1.8 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 22.8 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 7.0 | % | ASTM D638 |
| Fracture | 15 | % | ASTM D638 |
| Flexural Modulus | 1170 | MPa | ASTM D790 |
| Flexural Strength | 44.1 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 76.7 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PA 6 7510 GF20 | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| LNP™ LUBRICOMP™ ZFL34 compound | SABIC Innovative Plastics | PPE+PS | LNP™ LUBRICOMP™ |
| Kinta FR5500-002 | Kinta Technology (Hong Kong) Co., Ltd. | PC+ABS | Kinta |
| OTECH PVC OW135 - Wire Jacket | OTECH Corporation | PVC, Unspecified | OTECH PVC |
| Sylvin 8915-90 UV Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
