Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Molding M4821
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Molding |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | e5twvL_GeonVinylRigidMoldingM4821.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Geon™Vinyl Rigid Molding M4821 is a rigid PVC product,. It is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.32 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1(190°C/21.6 kg) | 2000 | g/10 min | ISO 1133 |
| Molding Shrinkage - Flow | 0.20 - 0.50 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 2 | 2780 | MPa | ASTM D638 |
| Tensile Strength 3(Yield) | 51.2 | MPa | ASTM D638 |
| Tensile Elongation 4(Break) | 21 | % | ASTM D638 |
| Flexural Modulus | 2740 | MPa | ASTM D790 |
| Flexural Strength | 79.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| 0°C, 3.18mm, injection molding | 32 | J/m | ASTM D256A |
| 23°C, 3.18mm, injection molding | 59 | J/m | ASTM D256A |
| Instrumented Dart Impact 5 | ASTM D3763 | ||
| 23°C, 3.18mm, injection molding, Energy to Peak Load | 27.1 | J | ASTM D3763 |
| 23°C, 3.18mm, injection molding, Total Energy | 75.9 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, annealed, 3.18mm | 67.0 | °C | ASTM D648 |
| 1.8 MPa, annealed, 3.18mm | 65.0 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.5 mm, ALL | V-0 | UL 94 | |
| 1.9 mm, ALL | 5VA | UL 94 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Transmittance 6(3180 µm) | 73.3 | % | ASTM D1003 |
| Haze (3180 µm) | 3.4 | % | ASTM D1003 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 202 - 204 | °C |
| Note Message | |
|---|---|
| 1 . | Procedure B |
| 2 . | Type 1, 51mm/min |
| 3 . | Type 1, 51mm/min |
| 4 . | Type 1, 51mm/min |
| 5 . | 3.40 m/sec |
| 6 . | CIE Illuminant C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8689-95 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| UTEC 3041 | Braskem | UHMWPE | UTEC |
| ADMER™ SF755A | Mitsui Chemicals America, Inc. | TPE | ADMER™ |
| AXELERON™ CC 3485 NT CPD | The Dow Chemical Company | HDPE | AXELERON™ |
| Optimum® 2014-XE | RAUH Polymers, Inc. | Copolyester | Optimum® |
