Order Products : sales@su-jiao.com
ALKAMIX™ MB6002
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | ALKAMIX™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | e5d6K5_ALKAMIX-MB6002.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ALKAMIX MB6002 is formulated with an antiblock additive at a concentration of 25 percent. ALKAMIX MB6002 can be added to polyethylene during extrusion to reduce the blocking tendency of film. The level required may vary according to desired properties, however the recommended addition level is between 1 to 3 percent. The maximum level of addition of MB6002 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 4 percent, when added to a polyethylene formulation free of any other additives. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.980 | g/cm³ | ASTM D1505 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Trademark PE LLD2920G | Trademark Plastics Corporation | LLDPE | Trademark PE |
| Badamid® A70 GF30 | Bada AG | Nylon 66 | Badamid® |
| Delrin® PC691 NC010 | DuPont Performance Polymers | Acetal (POM) Homopolymer | Delrin® |
| POLYblend PC/ABS 45FS GF20 | Polykemi AB | PC+ABS | POLYblend |
| LNP™ LUBRICOMP™ FL004 compound | SABIC Innovative Plastics | PE, Unspecified | LNP™ LUBRICOMP™ |
