Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Molding M3005
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Molding |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | e5KAvT_Geon-Vinyl-Rigid-Molding-M3005.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Geon™ Vinyl Rigid Molding M3005 is a Rigid Polyvinyl Chloride product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Plumbing/Piping/Potable Water. Primary characteristic: flame rated. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| Spiral Flow | 61.0 | cm | |
| Molding Shrinkage - Flow | 0.20 to 0.50 | % | ASTM D955 |
| PVC Cell Classification | 11432 | ASTM D1784 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 10 sec) | 82 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 3100 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 51.0 | MPa | ASTM D638 |
| Flexural Modulus | 3100 | MPa | ASTM D790 |
| Flexural Strength | 91.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact - Across Flow | ASTM D256A | ||
| 23°C, 3.18 mm, Compression Molded | 53 | J/m | |
| 23°C, 6.35 mm, Compression Molded | 37 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 6.35 mm | 72.8 | °C | |
| 1.8 MPa, Unannealed, 6.35 mm | 72.2 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm, ALL) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 193 to 202 | °C |
| Note Message | |
|---|---|
| 1 . | Type I, 51 mm/min |
| 2 . | Type I, 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makroblend庐 UT3907 | Covestro - Polycarbonates | PC+PBT | Makroblend® |
| Badaflex® TPE-S 40D 1038 | Bada AG | SEBS | Badaflex® |
| Bapolene® HD2032 | Bamberger Polymers, Inc. | HDPE | Bapolene® |
| ALCOM® PA66 910/1 AR5 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® PA66 |
| APEX® 90-A482R-90-NT | Teknor Apex Company | PVC, Flexible | APEX® |
