Order Products : sales@su-jiao.com
Baytec® MP-080
| Category: | PUR-Ether/MDI , Polyurethane (Polyether, MDI) |
| Manufacturer: | Covestro - PUR |
| Trademark: | Baytec® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | e3HzLz_Baytec-MP-080.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Baytec MP-080 diphenylmethane diisocyanate (MDI)-terminated polyether prepolymer is based on polypropylene ether glycol (PPG). |
| General Information | |
|---|---|
| Forms |
|
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 4.32 | MPa | ASTM D412 |
| 300% strain | 7.43 | MPa | ASTM D412 |
| Tensile Strength (Break) | 9.93 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 470 | % | ASTM D412 |
| Additional Information |
|---|
| Appearance: Yellow viscous liquidNCO: 7.8 to 8.2 wt%Viscosity at 25°C: 2500 mPa-sSpecific Gravity at 25°C: 1.08Flash Point, PMCC: 200°CDensity at 25°C: 9.05 lb/gal |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRIME TPO R110MP | Prime Polymer Co., Ltd. | PP Impact Copolymer | PRIME TPO |
| Thermx® LED 0201 | Celanese Corporation | PCT | Thermx® |
| Gallonprene® GP420-5001 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| Elastocon® 8150B | Elastocon TPE Technologies | TPE | Elastocon® |
| HIPOL™ F650 | Mitsui Chemicals, Inc. | PP, Unspecified | HIPOL™ |
