Order Products : sales@su-jiao.com
Multi-Flex® TPE A5904 LC
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Multibase, A Dow Corning Company |
| Trademark: | Multi-Flex® TPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | e2A4pz_Multi-Flex-TPE-A5904-LC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Multi-Flex® TPE A5904 LC is a Thermoplastic Elastomer (TPE) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Automotive. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 57 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 8.27 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 590 | % | ASTM D412 |
| Tear Strength | 26.3 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 23°C, 22 hr | 15 | % | |
| 70°C, 22 hr | 43 | % | |
| 100°C, 22 hr | 66 | % |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Rear Temperature | 188 | °C | |
| Middle Temperature | 193 | °C | |
| Front Temperature | 199 | °C | |
| Nozzle Temperature | 199 | °C | |
| Processing (Melt) Temp | 199 | °C | |
| Mold Temperature | 26.7 to 43.3 | °C | |
| Injection Rate | Moderate-Fast |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 160 | °C | |
| Cylinder Zone 3 Temp. | 199 | °C | |
| Cylinder Zone 5 Temp. | 210 | °C | |
| Melt Temperature | 204 | °C | |
| Die Temperature | 213 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYNIL® P240 HS | Nilit Plastics | Nylon 66 | POLYNIL® |
| TECHNO ABS F1384 | Techno Polymer Co, Ltd. | ABS | TECHNO ABS |
| Fortron® 6345L4 | Celanese Corporation | PPS | Fortron® |
| Grilamid® XE 4116 black 9288 | EMS-GRIVORY | Nylon 1010 | Grilamid® |
| MACOMASS PP MM-PP GF 20 | MACOMASS Verkaufs AG | PP, Unspecified | MACOMASS PP |
