Order Products : sales@su-jiao.com
RTP 200E SI 2
| Category: | Nylon, Unspecified , Polyamide |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | e1hdRB_RTP-200E-SI-2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.19 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 0.40 - 0.60 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 2960 | MPa | ASTM D638 |
| Tensile Strength | 76.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 3.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 3170 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 124 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 59 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 370 | J/m | ASTM D4812 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Additional Information |
|---|
| The value listed as Flammibility, UL 94, was tested in accordance with RTP Company methods. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 271 - 293 | °C | |
| Middle Temperature | 271 - 293 | °C | |
| Front Temperature | 271 - 293 | °C | |
| Mold Temperature | 66.0 - 99.0 | °C | |
| Injection Pressure | 103 - 124 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| LNP™ LUBRICOMP™ CZL36 compound | SABIC Innovative Plastics | PS (HIPS) | LNP™ LUBRICOMP™ |
| Perfactory® Photosilver | EnvisionTEC, Inc. | Acrylic, Unspecified | Perfactory® |
| TechnoElast D 5000 I 1 nat | TechnoCompound GmbH | TPE | TechnoElast |
| ALCOM® MED PS 1000 AS 14115 | ALBIS PLASTIC GmbH | PS (HIPS) | ALCOM® MED PS |
| Durethan® BKV 30 DUS000 000000 | LANXESS GmbH | Nylon 6 | Durethan® |
