Order Products : sales@su-jiao.com

3M™ Dyneon™ TFM™ Modified PTFE Compound TFM 3712

Category:	PTFE , Polytetrafluoroethylene
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ TFM™ Modified PTFE Compound
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	dy2ln6_3MDyneonTFMModifiedPTFECompoundTFM3712.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

3M™ Dyneon™ TFM™ Modified PTFE Compound TFM 3712 is a non-free-flowing suspension PTFE compound containing 15% glass fibre and 5% molybdenum disulfide for compression moulding.

Special Features

Increased thermal dimensional stability

Increased surface hardness

Improved deformation under load

Reduced friction and wear

Low moulding pressure

High limiting oxygen index (LOI)

Low friction behaviour

Improved mechanical properties

Exceptional temperature resistance

Good chemical stability

General Information
Filler / Reinforcement	Glass fiber reinforced material, 15% filler by weight
Additive	Molybdenum disulfide lubricant (5%)
Features	Low friction coefficient Weldable Lubrication
Uses	Washer Seals Application in Automobile Field
Forms	Powder
Processing Method	Compression molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	2.27	g/cm³	ASTM D4745-06
Apparent Density	0.53	g/cm³	ASTM D4894-07
Molding Shrinkage - Flow	2.8	%	ASTM D4894-07

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	68		DIN 53505

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	20.5	MPa	ASTM D4745-06
Tensile Elongation (Break)	370	%	ASTM D4745-06

Resin Grade	Manufacturer	Category	Trademark
Tenac™-C GN455	Asahi Kasei Chemicals Corporation	Acetal (POM) Copolymer	Tenac™-C
TYNEP® P5308	Tyne Plastics LLC.	PC+PBT	TYNEP®
Axiall PVC 9211	Axiall Corporation	PVC, Rigid	Axiall PVC
KOPLA PC KAP1500	KOPLA Co., Ltd.	PC+ABS	KOPLA PC
Infino GC-1017	SAMSUNG SDI CO., LTD.	PC+ABS	Infino