Order Products : sales@su-jiao.com
RTP 1200 S-80A TFE 15
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dwG8yP_RTP-1200-S-80A-TFE-15.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PTFE Lubricated |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.25 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.50 - 1.0 | % | ASTM D955 |
| Moisture Content | 0.010 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 83 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 34.5 | MPa | ASTM D412 |
| Tensile Elongation (Yield) | > 500 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 107 | °C | |
| Drying Time | 6.0 | hr | |
| Dew Point | -17.8 | °C | |
| Processing (Melt) Temp | 199 - 218 | °C | |
| Mold Temperature | 15.6 - 60.0 | °C | |
| Injection Pressure | 68.9 - 103 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNOGRAN® PEHDI SUV | Eurocompound Polymers | HDPE | TECHNOGRAN® |
| Bashplast Compound SSP-A17 (BP)/CB-B25 (BP) | Bashplast Ltd. | PE, Unspecified | Bashplast Compound |
| Chemlon® 250 G | Teknor Apex Company (Chem Polymer) | Nylon 6 | Chemlon® |
| Exact™ 3024 | ExxonMobil Chemical | Plastomer | Exact™ |
| Grivory® HT1V-5 FWA nat | EMS-GRIVORY | Nylon 6I/6T | Grivory® |
