Order Products : sales@su-jiao.com
Estane® ALR CL87A-V TPU
| Category: | TPU-Capro , Thermoplastic Polyurethane Elastomer (Polycaprolactone) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dvuXgn_Estane-ALR-CL87A-V-TPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Estane® ALR CL87A-V is an aliphatic, polycaprolactone-based TPU with a Shore A Durometer of 85-90. Features: Contains a UV package that enhances outdoor weatherability. This high performance resin is clear, UV resistant; it will not discolor and has excellent mechanical properties. Uses: Outdoor applications, protective films and graphics |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.10 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (175°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 85 - 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus (2.00 mm) | 21.4 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain, 2.00mm | 6.89 | MPa | ASTM D412 |
| 200% strain, 2.00mm | 15.7 | MPa | ASTM D412 |
| Tensile Strength (Break, 2.00 mm) | 62.2 | MPa | ASTM D412 |
| Tensile Elongation (Break, 2.00 mm) | 410 | % | ASTM D412 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 | °C | |
| Drying Time | 4.0 | hr | |
| Cylinder Zone 1 Temp. | 165 | °C | |
| Cylinder Zone 2 Temp. | 170 | °C | |
| Cylinder Zone 3 Temp. | 175 | °C | |
| Cylinder Zone 5 Temp. | 180 | °C | |
| Melt Temperature | 180 | °C | |
| Die Temperature | 180 | °C |
| Extrusion instructions |
|---|
| Screen Pack Recommendation: 20/40/80/20 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® A RV300W 3002 NER 5444 | Radici Plastics | Nylon 66 | Radilon® |
| Westlake LDPE EF603 | Westlake Chemical Corporation | LDPE | Westlake LDPE |
| UBESTA P3012 U | UBE Engineering Plastics, S.A. | Nylon 12 | UBESTA |
| VALOX™ 8032U resin | SABIC Innovative Plastics Europe | PBT+PET | VALOX™ |
| PEARLCOAT® 125K | Lubrizol Advanced Materials, Inc. | TPU-Polyester | PEARLCOAT® |
