Order Products : sales@su-jiao.com
Glastic® 1494
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Glastic Corporation |
| Trademark: | Glastic® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dv6NiC_Glastic-1494.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Glastic® Grade 1494 is a fiberglass reinforced thermoset polyester material. It is available in sheet form as well as a wide selection of channel, angle, and tube sizes. These materials are the industry standard for flame and arc/track resistant electrical insulation. In addition, the excellent combination of high strength, flame resistance, and low smoke generation has given it application in many other areas such as transit and marine where safe, yet economical materials are required. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| UL File Number |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.81 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.40 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (1.60 mm) | 11700 | MPa | ASTM D638 |
| Tensile Strength (1.60 mm) | 55.2 | MPa | ASTM D638 |
| Flexural Strength | ASTM D790 | ||
| 1.60 mm | 152 | MPa | ASTM D790 |
| 130°C, 1.60 mm | 90.3 | MPa | ASTM D790 |
| Compressive Strength (1.60 mm) | 228 | MPa | ASTM D695 |
| Shear Strength (1.60 mm) | 80.0 | MPa | ASTM D732 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (1.60 mm) | 480 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow (1.60 mm) | 2.0E-5 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity | 0.27 | W/m/K | ASTM C177 |
| RTI Elec (1.60 mm) | 130 | °C | UL 746 |
| RTI (1.60 mm) | 160 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 3.1E+12 | ohms | ASTM D257 |
| Dielectric Strength | ASTM D149 | ||
| 1.60 mm, Parallel S/S in Oil | 4.7 | kV/mm | ASTM D149 |
| 1.60 mm, Perpendicular S/T in Air | 18 | kV/mm | ASTM D149 |
| 1.60 mm, Perpendicular S/T in Oil | 23 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 1.60 mm, 1 Hz | 4.10 | ASTM D150 | |
| 1.60 mm, 60 Hz | 4.10 | ASTM D150 | |
| Dissipation Factor | ASTM D150 | ||
| 1.60 mm, 60 Hz | 0.013 | ASTM D150 | |
| 1.60 mm, 1 MHz | 0.010 | ASTM D150 | |
| Arc Resistance (1.60 mm) | 180 | sec | ASTM D495 |
| Comparative Tracking Index (CTI) (1.60 mm) | 500 | V | UL 746 |
| High Voltage Arc Tracking Rate (HVTR) (1.60 mm) | 0.00 | mm/min | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 2.36 mm | HB | UL 94 | |
| 2.39 mm | V-0 | UL 94 | |
| Oxygen Index (1.60 mm) | 35 | % | ASTM D2863 |
| Additional Information |
|---|
| NEMA Grade, NEMA LI-1: GPO-3Inclined Plane Track Resistance, ASTM D2303, 0.125 in: 1000 minFlammability, UL 94, >0.094: V-0Flammability, UL 94, <0.093: HB |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Akulon® K240-HPG3 | DSM Engineering Plastics | Nylon 6 | Akulon® |
| Color-in™ HAC-M | Shanghai KumhoSunny Plastics Co., Ltd. | PC+ABS | Color-in™ |
| Di-Pak™ E-4501 | Hapco Inc. | TP, Unspecified | Di-Pak™ |
| IROSTIC® S 6148 | Huntsman Corporation | TPU, Unspecified | IROSTIC® |
| Lucent PP CPP-220 | Lucent Polymers, Inc. | PP, Unspecified | Lucent PP |
