Borstar® ME6053 Datasheet,MDPE,Borealis AG-SHANGHAI SUSHENG

Borstar® ME6053

Category:	MDPE , Medium Density Polyethylene
Manufacturer:	Borealis AG
Trademark:	Borstar®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	duO0HL_Borstar-ME6053.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Borstar ME6053 is a natural, UV stabilised, colourable, medium density (MD) jacketing compound, which is produced with the Borealis proprietary Borstar bimodal process technology. Borstar technology allows the manufacturing of polymers outside the traditional MFR and density range making it possible to optimize processability, reduce shrinkage and yet provide excellent physical toughness and environmental stress crack resistance (ESCR). Borstar ME6053 contains a well dispersed UV-stabiliser in sufficient amount providing a measure of weathering resistance. In order to fully utilise the unique low shink properties of Borstar ME6053 we recommend the use of non-warping colour masterbatches. Borstar ME6053 is designed for: Jacket for energy and communication cables Borstar ME6053 offers a balance of properties giving advantages in manufacturing, installation and lifetime performance of communication and energy cables. Borstar ME6053 meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: ASTM D 1248 Type II, Class A, Category 4, Grade E8, E9, J4 BS 6234: Type 03, TS2 DIN 57818/VDE 0818 EN 50290-2-24 HD 620 S1, Part 1, table 4B, DMP 5, 13, 16 IEC 60502, Type ST7 IEC 60840, Type ST7 ISO 1872-PE, KHLN, 33 D-006 NF C32-060

Message

Borstar ME6053 is a natural, UV stabilised, colourable, medium density (MD) jacketing compound, which is produced with the Borealis proprietary Borstar bimodal process technology.

Borstar technology allows the manufacturing of polymers outside the traditional MFR and density range making it possible to optimize processability, reduce shrinkage and yet provide excellent physical toughness and environmental stress crack resistance (ESCR).

Borstar ME6053 contains a well dispersed UV-stabiliser in sufficient amount providing a measure of weathering resistance. In order to fully utilise the unique low shink properties of Borstar ME6053 we recommend the use of non-warping colour masterbatches.

Borstar ME6053 is designed for:
Jacket for energy and communication cables
Borstar ME6053 offers a balance of properties giving advantages in manufacturing, installation and lifetime performance of communication and energy cables.

Borstar ME6053 meets the applicable requirements as below when processed using sound extrusion practice and testing procedure:

ASTM D 1248 Type II, Class A, Category 4, Grade E8, E9, J4

BS 6234: Type 03, TS2

DIN 57818/VDE 0818

EN 50290-2-24

HD 620 S1, Part 1, table 4B, DMP 5, 13, 16

IEC 60502, Type ST7

IEC 60840, Type ST7

ISO 1872-PE, KHLN, 33 D-006

NF C32-060

General Information
Additive	UV stabilizer
Features	Moisture resistance High ESCR (Stress Cracking Resistance) Good UV resistance Workability, good Good coloring Good wear resistance Scratch resistance Good weather resistance Good toughness Low shrinkage High hardness
Uses	Communication Cable Jacketing Cable sheath Cable sheath Wire and cable applications
Agency Ratings	ASTM D 1248, II, Class A, Cat. 4 E8, E9, J4 BS 6234 Type 03 TS2 EN 50290-2-24 HD 620 S1 Part 1, Table 4B, DMP 5, 13, 16 IEC 60502 Type ST7 IEC 60840 Type ST7 NF C 32-060
Appearance	Natural color
Forms	Particles
Processing Method	Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.936	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)			ISO 1133
190°C/2.16 kg	0.70	g/10 min	ISO 1133
190°C/5.0 kg	3.0	g/10 min	ISO 1133
Environmental Stress-Cracking Resistance ¹(50°C, 10% Igepal, F0)	> 5000	hr	IEC 60811-4-1/B

Hardness	Nominal Value	Test Method
Durometer Hardness
Shaw D, 1 sec	54	ISO 868
Shaw D, 3 seconds	53	DIN 53505

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)	32.0	MPa	ISO 527-2/50
Tensile Strain (Break)	800	%	ISO 527-2/50
Flexural Modulus	600	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -76.0	°C	ASTM D746

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity ²	1.0E+16	ohms·cm	IEC 60093
Dielectric Strength	20	kV/mm	IEC 60243-1

Additional Information	Nominal Value	Unit	Test Method
Pressure Test ³(115°C)		%	IEC 60811-3-1

Extrusion	Nominal Value	Unit
Drying Temperature	< 90.0	°C
Melt Temperature	180 - 190	°C

Extrusion instructions
Preheating: 90°CCooling water: 60°C

Note Message
1 .	No crack
2 .	Compound
3 .	at high temperature, 6 hrs

Resin Grade	Manufacturer	Category	Trademark
YUPLENE® B360F	SK Global Chemical	PP Impact Copolymer	YUPLENE®
VAMPAMID 66 3054 V0	Vamp Tech	Nylon 66	VAMPAMID
LEXAN™ SLX9271T resin	SABIC Innovative Plastics	PC	LEXAN™
LUVOCOM® 50/TF/15/BK-1	Lehmann & Voss & Co.	PC	LUVOCOM®
Dryflex® SE 35A301	ELASTO	TPE	Dryflex®

Resin Grade

Manufacturer