Order Products : sales@su-jiao.com
UBESTA 3024NUX
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | UBE Industries, Ltd. |
| Trademark: | UBESTA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | duAcGT_UBESTA-3024NUX.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Short cycle (Injection) |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Part Marking Code |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.02 | g/cm³ | ISO 1183 |
| Molding Shrinkage | Internal Method | ||
| Across Flow | 1.3 | % | |
| Flow | 0.90 | % | |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.70 | % | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 46.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 50 | % | ISO 527-2 |
| Flexural Modulus | 1600 | MPa | ISO 178 |
| Flexural Stress | 60.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 9.0 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 85.0 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 45.0 | °C | ISO 75-2/A |
| CLTE - Flow | 1.3E-4 | cm/cm/°C | ISO 11359-2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sipolprene® 35195 B | SIPOL S.p.A | TPC-ET | Sipolprene® |
| ALCOM® PA6 900/13 GF15 MRX45 | ALBIS PLASTIC GmbH | Nylon 6 | ALCOM® PA6 |
| Geon™ CPVC LC500 | PolyOne Corporation | CPVC | Geon™ CPVC |
| GERMAMID 6.6 GF 25 V0 | Kunststoff-Kontor-Hamburg GmbH | Nylon 66 | GERMAMID |
| Polipom 20D | Poliblend S.p.a. | Acetal (POM) Homopolymer | Polipom |
