Order Products : sales@su-jiao.com
RTP 1404 N L
| Category: | PESU , Polyethersulfone |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dtDtGA_RTP-1404-N-L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.54 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 0.20 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.35 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 8270 | MPa | ASTM D638 |
| Tensile Strength | 138 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 2.8 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 7580 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 200 | MPa | ASTM D790 |
| Compressive Strength | 141 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 85 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 690 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 214 | °C | ASTM D648 |
| CLTE - Flow | 3.1E-5 | cm/cm/°C | ASTM D696 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | V-0 | UL 94 |
| Additional Information |
|---|
| The value listed as Flammibility, UL 94, was tested in accordance with RTP Company methods. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 343 - 366 | °C | |
| Middle Temperature | 343 - 366 | °C | |
| Front Temperature | 343 - 366 | °C | |
| Mold Temperature | 135 - 177 | °C | |
| Injection Pressure | 69.0 - 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC 6926 NA 023 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| Sinvicomp DBS3025 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | Sinvicomp |
| AMPLIFY™ TY 3352 | The Dow Chemical Company | MAH-g | AMPLIFY™ TY |
| Etinox® EK-8040 | Ercros, S.A. | PVC, Flexible | Etinox® |
| Sylvin 7833-90 Grey 9193 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
